Overmax X-bee drone 9.5 fold Bedienungsanleitung Seite 34

Surrounding requirements
1.
Do not fly the drone in bad weather conditions, such as strong wind, snow, rain, fog, etc.
2.
Choose open space, away from high buildings. The buildings filled with numerous
steel elements may affect the compass and interfere with GPS signal, causing wrong
EN
position of the drone or location issues.
3.
During the flight, keep the drone in view. Avoid obstacles, crowds, water bodies, etc.
4.
To avoid interference, do not fly the drone near power lines, base stations, supporting
structures, etc.
5.
Avoid flights higher than 6000 m a.s.l. In view of environmental factors, the efficacy
of the battery and power system drops, which may affect the quality of flight.
6.
GPS signal issues may occur in the North and South Pole.
NOTE! Pursuant to the regulations of the International Civil Aviation Organization and
air traffic control of particular countries regarding airspace control, as well as regulations
concerning unmanned aircraft management, drones can be used solely in the specific
airspace. For the sake of safe flight, the limited flight function (limited altitude and distance)
is active in the device by default to facilitate safe use of the product.
Tips on camera use
1.
Inspect the product before you start it.
2.
Choose a suitable camera angle.
3.
Fly and take photos on sunny and windless days.
4.
Perform the test flight.
5.
Move sticks slowly to make the flight smooth.
How to clean and maintain
1.
Do not use chemicals to clean the drone.
2.
Do not use water to clean the drone.
3.
To clean the drone and its accessories, switch the device off, remove batteries and
wipe with a dry cloth.
4.
Keep the drone and its elements in the dry area, out of reach of children.
The pictures are for reference only. The real design of the products may differ from the pictures presented.