Renkforce A610 Bedienungsanleitung Seite 58

All manuals and user guides at all-guides.com
Once you have set all parameters as desired, you can start the
measurement. Confirm this with "Done". The display will now
switch to a new display. You can start the measurement in the
lower right (Tap "Start") or interrupt a current measurement (Tap
"Stop"). To the left of the "Start/Stop Button", you can see the
name of the current measurement, e.g. "Recording 5"), the date
and starting time.
You can also see the current values in a graphical display with
a time line and the current measured value. The display for this
measured value can be scrolled to the left or right in order to view
the min/max values or the average temperature. If the function "Av-
erage value" is chosen, the graphical display will show a green line
with the average value. The set upper threshold is displayed with a
red line, the lower threshold with a blue line.
48
A short interval in "Test range" means a high number
of recorded data. If you select a long recording time for
the measurement as well, the remaining energy in the
batteries may become too low. In that case, the app will
display a corresponding note (see figure 8).
Figure 8