Section / Test Area - Renkforce A610 Bedienungsanleitung

All manuals and user guides at all-guides.com
ranges with different values. Confirm your input with "Done". Also
observe the information in the following chapters on this.
e) Section / test area
In "Section", specify the measuring settings that you desire for
recording of the measurement. First, choose the measuring unit
(temperature or time) that is to be used (see "c) Test Range" in
this chapter). If you select "Temp", the display content looks as
shown in figure 6. If you select "Time", the display content looks
as shown in figure 7.
Figure 6 Figure 7
Now tap the temperature values displayed at the left of the display
under "Section" (for "Time" on the time values). A new window is
opened. Set the upper value (maximum; e.g. 22 for the tempera-
ture) or a time value and the lower value (minimum; e.g. 20 for
the temperature). Confirm the set values with "Done" - just like all
following settings.
45