Basic Settings - Renkforce A610 Bedienungsanleitung

All manuals and user guides at all-guides.com
c) Basic Settings
The device that has just been newly coupled with the app (thermo
logger) is now indicated in the app under "Connected Device". The
display for the device is a type designation that can be changed
individually as follows:
• Select the gear at the upper right of the display. New display
content is displayed.
• Briefly tap the type designation of the coupled device. The
keyboard is displayed. Now you can assign a new name (e.g.
Logger 1) to the coupled device. Save your input with "Done".
• To delete a coupled device, tap the gear at the upper right of
the display of the app again and select "Edit". Now "Delete" is
displayed in the Android app. In the iOS-app, a minus symbol
(-) is shown in front of the device. It must be used to delete it.
If a device is removed from the app (deleted), all previ-
ous recordings of the device are deleted as well. In order
to avoid deletion of these data, they should be secured
on the mobile device or any other storage medium.
41