Editing A Barcode; Deleting A Barcode; Using The Label Maker Memory; Saving A Label - Dymo LabelManager 420P Bedienungsanleitung

Editing a Barcode

You can edit the text for an existing barcode.
To edit a barcode
Move the cursor anywhere within the barcode text.
1
The barcode indicator is shown on the display.
Enter any character.
2
The barcode edit screen is displayed.
Edit the barcode text and press
3

Deleting a Barcode

A barcode is entered on the label as one character.
To delete a barcode
Place the cursor at the end of the barcode text on
1
the display.
Press .
2

Using the Label Maker Memory

The label maker has a powerful memory feature that allows
you to save the text of up to nine frequently-used labels.
You can recall saved labels and you can insert saved text
into a label.

Saving a Label

You can save up to nine frequently-used labels. When you
save a label, the text and all formatting are saved.
To save the current label
Press .
1
The first available memory location is displayed.
Use the navigation keys to move through the locations.
2
You can store a new label in any of the memory
locations.
Select a memory location and press
3
Your label is saved and you are returned to the label.

Opening Saved Labels

You can easily open labels saved in memory to use at a
later time.
To open saved labels
Press . The first memory location is displayed.
1
Use the navigation keys to select a label to open and
2
press .

Inserting Saved Text

You can insert the text of a saved label into the current
label. Only the saved text is inserted, not the formatting.
To insert saved text
Position the cursor at the location in the label where you
1
want to insert the text.
Press , select Saved Text, and press
2
Insert
The first memory location is displayed.
Use the navigation keys to select the text you want
3
to insert.
Press .
4
The text is inserted in the current label.
.
.
.
10

Caring for Your Label Maker

Your label maker is designed to give you long and trouble-
free service, while requiring very little maintenance. Clean
your label maker from time to time to keep it working
properly. Clean the cutter blade each time you replace the
label cassette.
To clean the cutter blade
Remove the label cassette.
1
Press and hold the cutter button to expose the cutter
2
blade. See Figure 7.
Cleaning
tool
Print head
Figure 7
Use a cotton ball and alcohol to clean both sides of
3
the blade.
To clean the print head
Remove the label cassette.
1
Remove the cleaning tool from inside the label
2
compartment cover.
Gently wipe the padded side of the tool across the print
3
head. See Figure 7.
Using Your Label Maker with Your
Computer
Your label maker can be used as a standalone label printer
or you can print labels from your computer using the built-in
software or DYMO Label v.8 software.

Connecting the Label Maker to your Computer

The label maker connects to your computer using the USB
connection located on the top of the label maker.
To connect the label maker to your computer
Plug the USB cable into the USB port on the top of the
1
label maker. See Figure 8.
Figure 8
Plug the other end of the USB cable into an available
2
USB port on your computer.
Press
and hold