Paper; Types And Dimensions; Insertion - Olivetti JP 90 Bedienungsanleitung

All manuals and user guides at all-guides.com

Paper

This section describes the types and characteristics of the
paper you can use in your printer.

Types and Dimensions

Types
•
Plain paper: paper weight between 70 and 80 g/m
•
Transparencies: paper-backed transparencies specifically
indicated for ink-jet printers.
•
Coated paper.
•
Glossy paper.
Best results are obtained using good quality plain office
paper. Up to 15 sheets of paper can be inserted in the ASF.
Sub-standard paper can affect the quality of printing.
Always align the paper/film at the left hand edge.
Make sure the paper is inserted in the printer so as to
print on the right face of the page (see indication arrow
on paper wrapping).
18
Dimensions
The following table contains the dimensions of the types of
paper which you can use in your printer:
Format millimetres
Horizontal A5
A4
Letter 215.9 x 279.4
Legal 215.9 x 355.6
2
.
The maximum paper feed path is 217 mm/8.54 in.

Insertion

The paper loading procedure is described in the Quick Start
and illustrated on page X.
Automatic
•
Plain paper: up to 15 standard format single sheets
inserted as a pack.
•
Transparencies: up to 5 pieces at a time, with a single
sheet of plain paper after the last piece to help feed-
through. Remove each piece from the output stacker as
soon as it has been expelled from the printer.
•
Coated paper: up to 5 sheets at a time.
inches
210 x 148 8.26 x 5.8
210 x 297 8.26 x 11.7
8.5 x 11
8.5 x 14
User Guide - Paper