Olivetti JP 90 Bedienungsanleitung Seite 23

All manuals and user guides at all-guides.com
For Windows® users : to work in Windows® 3.1/3.11 or
Windows® 95 environment, you MUST first install the
appropriate Windows® driver from the diskettes. These
drivers give you access to all the printer features.
For DOS users : please refer to "Using Software" in the User
Guide.
Windows® 3.1/3.11
To install the Windows® driver through Control Panel in
Main folder, proceed as follows:
1. Insert the specific diskette in drive A (usually) of your PC.
2. Activate Windows® environment (if necessary, consult
your Windows® user manual).
3. Activate the Control Panel in the Main window, clicking
twice with your mouse indicator on the corresponding icon.
4. Select the Printers icon, in the same way.
5. If the Installed Printers box is empty, click on Install..
6. If the Installed Printers box already contains one or more
driver names, click on Add>> , select Install Unlisted or
Updated Printer in the List of Printers and then click on
Install... .
7. Check that the Install Driver window already indicates the
drive (usually A) in which you have inserted the driver
diskette, otherwise, click on the drive name and change it,
using your PC keyboard.
Quick Start
8. Click on Browse..., to display the nationalised
drivers available.
Click twice on the driver name you require in
Directories: (suffix "en" = driver in English) and
then click on OK.
9. The Install Driver window will now show the driver you
have selected; click on OK.
10. The Add Unlisted or Updated Printer window contains
the list of drivers present on the diskette. Select the driver
with your printer name and click on OK.
11. Your driver is now installed and your printer name appears
in the List of Printers.
12. With your printer name highlighted, click on the Set as
Default Printer button, so that your printer will be active in
all your Windows® applications.
13. Check your printer connection by clicking on the
Connect.. button.
By default, your printer will be connected on the LPT1 port
which corresponds to the hardware connection of a
parallel interface cable.
14. Click on the Close button of the Printers dialogue box.
For further information, consult your Windows® 3.1/3.11
documentation.
5