Adjusting Non-Verifiable Models - KERN FFN-N-Serie Betriebsanleitung

7.1.1 Adjusting non-verifiable models

Display
CAL
1 F
UnLQD
(Example)
0.0
19
Operation
Start balance by pressing
Whilst the weighing scale is carrying out a self-test,
(00...- 99...) press
CAL" appears.
Press ,
in the display appears „UnLod".
Press again
the weight value will be displayed.
Enter value for adjustment weight (See chpt 1) by
Position weight
Press
Remove weight whilst scale is carrying out self-test
Weighing scale changes to zero display.
This completes the adjustment process.
and hold until the message "F1
FFN-N-BA-e-1121