Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Tips
1
Pull up master fader (channel 5) to use dimmer channels 1-4.
2
The strobe effect is visible only if the dimmer channels 1-4 are active.
3
Channel 6 determines the hoisting function. The speed can be adjusted with channel 7.
4
While creating your show, please take into account the hoisting time. A new step initiated before the hoisting of
the previous step has been completed could lead to malfunctions or unpleasant noises.
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lenses, in
particular, should be clean to ensure that light will be emitted at maximum brightness.
1
Disconnect the device from power and allow it to cool before cleaning.
2
Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may damage
the surface. Make sure that no liquids can enter the device.
3
The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as this
may result in damage. Maintenance and service operations are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts. Should you have further questions, please contact
your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1
Disconnect the device from power and allow it to cool.
2
Open the fuse holder of the mains connection with a fitting screwdriver.
3
Remove the old fuse from the fuse holder and replace it with a new fuse.
4
Carefully push the fuse holder back into its position before reapplying power.
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal
which is not harmful to the environment. Devices marked with this symbol must not be disposed of as
household waste. Contact your retailer or local authorities for more information. Remove any inserted
batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used batteries/ rechargeable
batteries. Disposing of them in the household waste is prohibited. You may return your used batteries
free of charge to collection points in your municipality and anywhere where batteries/rechargeable
batteries are sold. By disposing of used devices and batteries correctly, you contribute to the
protection of the environment.
Unlock the winch with channel fader 8. Otherwise it keeps moving
back to its starting position. Repeat for all hoists and check if the
starting position of the Space Balls is correct. If so, you can now
start operation and create your show.
CLEANING AND CARE
PROTECTING THE ENVIRONMENT
Step 4
25 • EN
e.g. value
100.
Werbung
Inhaltsverzeichnis
