Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Please read the safety warnings carefully and only use the product as described in this manual to avoid
accidental injury or damage.
Intended use
• This LED ball with hoist motor is used to create decorative indoor lighting effects. The mirror ball is designed for
professional use in the field of event technology, e.g. in discos. It is not suitable for household lighting.
• Only use the product according to the instructions given herein. Damages due to failure to follow these operating
instructions will void the warranty! We do not assume any liability for any resulting damage.
• We do not assume any liability for material and personal damage caused by improper use or non-compliance with
the safety instructions. In such cases, the warranty will be null and void.
• Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the
warranty invalid.
Warning – risk of injuries
Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down! Make sure that all
components are installed securely and cannot fall down. The installation must be carried out by a
specialist who is familiar with the hazards and the relevant regulations. Make sure that the installation
complies with the standards and rules that apply in your country, in particular BGV C1 (DGUV Vorschrift
17) in Germany.
• If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer.
Improper installation can result in bodily injury and or damage to property.
• The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions.
• If the devices are to be operated above persons, additional risks arise. A hazard analysis based on the location
and application must be performed in order to ensure dimensioning and measures for a safe operation. All
devices meet the professional association safety regulations regarding safety and operation.
• For overhead use, always secure the spot with a secondary safety attachment such as a safety bond or safety
net.
• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the devices.
• Do not look directly at the light source. Persons with light-sensitive epilepsy may suffer from epileptic seizures or
fall unconscious.
• For commercial use the country-specific accident prevention regulations of the government safety organization for
electrical facilities must be complied with at all times.
• The operator has to make sure that safety-relating and machine-technical installations are approved by an expert
before taking into operation for the first time and after changes before taking into operation another time.
• The operator has to make sure that safety-relating and machine-technical installations are approved by an expert
after every four year in the course of an acceptance test.
• The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled
person once a year.
• The operator has to make sure that all rigging gear is inspected by a qualified person before each use. The
inspection must include a visual inspection and load tests in motion.
Danger to children and people with restricted abilities
• This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying
around carelessly. Never leave this device running unattended.
• This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having
corresponding knowledge and experience. Other persons may use this device only if they are supervised or
instructed by a person who is responsible for their safety.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
WARNING!
18 • EN
Werbung
Inhaltsverzeichnis
