Aux In Mode - Revo SuperSignal GPE024L-180133-Z Bedienungsanleitung

FM RADIO MODE
FM SETTINGS
Press the button to access the FM MODE MENU. From here
you can set some FM preferences such as SCAN SETTING and AUDIO
SETTING.
SCAN SETTING allows you to decide whether the radio should stop
scanning only when it finds a station with a strong signal.
AUDIO SETTING gives you the option of listening to a station in mono,
should the signal strength not be sufficiently strong to allow stereo
reception.

AUX IN MODE

AUX IN MODE allows you to play audio from an external source (such
as an MP3 player) through your radio.
To do so, connect your external audio source to the 3.5mm AUX IN
connector on the rear of SUPERSIGNAL.
Turn the volume down low on both SUPERSIGNAL and, if adjustable,
the external device.
Now press until the Auxiliary Input mode intro screen is displayed.
Adjust the volume of SUPERSIGNAL and, if necessary, the external
audio device as required.
46
14:12
Auxiliary Input
14:12
Auxiliary Input
6-11-2013
14:12
BBC R2
Other Music
14:12
Preset Stored
14:12
FM
<Scan Setting >
14:12
Auxiliary Input
14:12
Auxiliary Input
6-11-2013