Auto Update - Revo SuperSignal GPE024L-180133-Z Bedienungsanleitung

SYSTEM SETTINGS

AUTO UPDATE

Update from ANY : Automatically takes time/date from DAB or FM
signals. SUPERSIGNAL needs to have been operated in DAB or FM
MODE (and have received a signal) before this information can be
extracted.
UPDATE FROM DAB : Forces the radio to take the time/date from DAB
signal.
UPDATE FROM FM : Forces the radio to take the time/date from FM
signal.
CONTRAST
SUPERSIGNAL allows a degree of control over the contrast of its OLED
display, meaning that both its STANDBY and POWER ON contrast levels
can be independently set to HIGH, MEDIUM or LOW brightness levels.
To change the contrast settings, press
from the menu list. You will now be able to modify the default
brightness level settings for the two modes of operation - STANDBY
and POWER ON. Select the mode you'd like to change from these
two options, then choose your desired brightness level. Your chosen
setting will be held in memory indefinitely, but can be changed at any
time.
LANGUAGE
The default language on your radio is English, though 3 other
languages are supported as follows:
French German Italian
To change the current language setting, select LANGUAGE from the
MAIN MENU, then select your choice.
52
then select CONTRAST
14:12
Set Time
14 : 13
14:12
Auto Update *
<Update from Any >
14:12
Alarm 1: Off
Alarm 2: Off
14:12
Contrast
<Power On >
14:12
Language
<English >
14:12
14:12
Factory Reset?
Alarm 1: Off
<No> Yes
Alarm 2: Off