Herunterladen Inhalt Inhalt Diese Seite drucken

Fm Radio Mode; Fm Mode / Aux-In Mode - Revo SUPERCD Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SUPERCD:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

FM RADIO MODE

FM OPERATION
Please ensure that the antenna is extended before operation in FM
MODE.
To enter FM MODE, press the
button until the FM MODE intro
screen is displayed, alternatively press
then select MAIN MENU,
then FM from menu option list.
If this is the fi rst time that SUPERCD has been used in FM MODE,
scanning will start at the beginning of the frequency range -
otherwise SUPERCD will default to the station that was being listened
to last.
Pressing the SELECT button will start the radio scanning for the next
available station. SUPERCD will automatically stop scanning when a
station is found.
To fi ne tune, use UP or DOWN on the joystick controller to
incrementally change the frequency.
When on an FM station that has a strong signal and is broadcasting
RDS information, SUPERCD will display the station name and other
pieces of text information on-screen.
FAVOURITE STATION PRESETS
SUPERCD allows you to store your favourite stations as presets, either
via its 10 front panel mounted 'hot-keys', or the numbered preset
buttons located on the remote control.
To store the station you are currently listening to as a preset, simply
press and hold a preset button until 'Preset Stored' is display on your
radio's screen. The preset number that has been assigned to the
station will be displayed at the bottom of the screen.
If you want to change a particular preset in the future, repeat
the process and the previously stored preset will be automatically
overwritten.
14
FM RADIO MODE
FM SETTINGS
Press the
you can set some FM preferences such as SCAN SETTING and AUDIO
SETTING.
FM
radio
SCAN SETTING allows you to decide whether the radio should stop
scanning only when it fi nds a station with a strong signal.
87.50 MHz
AUX-IN MODE
AUX IN MODE allows you to play audio from an external source (such
as an MP3 player) through your device.
To do so, connect your external audio source to the 3.5mm AUX IN
connector on the rear of SUPERCD.
Turn the volume down low on both SUPERCD and, if adjustable, the
external device.
BBC R3
Composer of the Week
Coming next - Proms
Chamber Music 2009
Now press
press
Adjust the volume of SUPERCD and, if necessary, the external audio
device as required.
Preset stored
button to access the FM MODE MENU. From here
until the AUX IN screen is displayed, alternatively
then select MAIN MENU, then choose AUX IN.
Scan setting
Audio setting
Main menu
>
A u x ilia r y I n p u t
Audio in
Aux in
T o d a y 's D a t e :
2 2 / 0 2 / 1 5
15

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis