Fm Mode / Aux-In Mode - Revo heritage Bedienungsanleitung

FM RADIO MODE
FM SETTINGS
Press the button to access the FM MODE MENU. From here
you can set some FM preferences such as SCAN SETTING and AUDIO
SETTING.
SCAN SETTING allows you to decide whether the radio should stop
scanning only when it fi nds a station with a strong signal.
AUDIO SETTING gives you the option of listening to a station in mono,
should the signal strength not be suffi ciently strong to allow stereo
reception.
AUX IN MODE
AUX IN MODE allows you to play audio from an external source (such
as an MP3 player) through your radio.
To do so, connect your external audio source to the 3.5mm AUX IN
connector on the rear of Heritage.
Turn the volume down low on both Heritage and, if adjustable, the
external device.
Now press until the AUX IN screen is displayed, alternatively
press then select MAIN MENU, then choose AUX IN.
Adjust the volume of Heritage and, if necessary, the external audio
device as required.
Scan setting
Audio setting
Main menu
Auxi li ary I nput
Audio in
Aux in
Today' s Date :
15/10/09
>
13