Troubleshooting Table - hanseatic SY-3388A2-P1-C81-L22-600 Gebrauchsanleitung

Page EN-22

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem
Fans and lighting not
working.
Lighting not working.
Grease is dripping off
the appliance.
Circulation air opera-
tion:
Odours are not ade-
quately removed;
weak airflow.
Exhaust air operation:
Poor performance.
The motor stops after
a few minutes.
Buzzing noise.
Possible causes
The appliance is dis-
connected from the mains.
LED bulb is defective.
Grease filter is clogged.
Grease filter is clogged.
The exhaust hood does
not have a sufficient air
supply.
The exhaust air hose is
bent or too long.
The appliance has overhe-
ated, which triggered the
internal circuit breaker.
Foreign object in the fan.
Solutions, tips
Check to ensure that the mains plug is
positioned correctly. Check the socket
by connecting another electric device.
Check the fuse.
Contact our service (see page EN-23).
Clean the grease filter
(see page EN-9).
Clean the grease filters and/or replace
the activated charcoal filters (starting at
page EN-9).
The exhaust hood expels a large amount
of exhaust air. This is why you need
to provide a sufficient air supply, e.g.
by providing non-sealable openings in
doors, windows and ventilation conduits.
Note the safety notices starting on page
EN-4.
Check whether the exhaust air hose is
bent or too long.
Make sure there is an adequate air sup-
ply. Note the safety notices starting on
page EN-4.
Contact our customer service team (see
page EN-23).