Installation; Overhead Rigging - EuroLite LED KLS-120 FX Bedienungsanleitung

INSTALLATION

Overhead rigging

WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
The device can be attached to your truss system using suitable TPC couplers. Use couplers with an M10
screw - see the mounting threads on the upper side of the device.
1 Insert the M10 screws into the mounting threads of the device and then tighten them together with the
TPC couplers.
2 Hook the TPC couplers into the truss and tighten the locking screws.
The structure (truss) to which you are attaching the fixtures is secure.
1 The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
2 Block access below the work area and work from a stable platform when installing the device.
3 Use rigging hardware that is compatible with the structure and capable of bearing the weight of the
device. Please refer to the "Accessories" section for a list of suitable rigging hardware.
4 Secure the device with a safety bond or other secondary attachment. This secondary safety attachment
must be sufficiently dimensioned in accordance with the latest industrial safety regulations and
constructed in a way that no part of the installation can fall down if the main attachment fails. An
appropriate eyelet is mounted on the device for fixation of the safety rope. Fasten the safety rope in such
a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.
5 To align the device, release the fixation screws at the mounting bracket, adjust the desired inclination
angle and tighten the fixation screws.
6 After installation, the device requires inspections periodically to prevent the possibility of corrosion,
deformation and looseness.
All manuals and user guides at all-guides.com
Use 1 appropriate coupler to rig the fixture on the truss.
Make sure that the device is fixed properly! Ensure that
CAUTION!
25/36 00128818, Version 1.1