LG UUA1 Montageanleitung Seite 5

• Failure to carefully read and follow all instructions in this
manual can result in equipment malfunction, property
damage, personal injury and/or death. (for R32)
• Compliance with national gas regulations shall be observed
Installation
• Do not use a defective or underrated circuit breaker. Use the
correctly rated breaker and fuse. There is risk of fire or electric
shock.
• For electrical work, contact the dealer, seller, a qualified
electrician, or an Authorized Service Center. Do not
disassemble or repair the product by yourself. There is risk of
fire or electric shock.
• Always ground the product as per the wiring diagram. Do not
connect the ground wire to gas or water pipes lightening rod
or telephone ground wire. There is risk of fire or electric
shock.
• Install the panel and the cover of control box securely. There
is risk of fire or electric shock due to dust , water etc.
• Use the correctly rated breaker or fuse. There is risk of fire or
electric shock.
• Do not modify or extend the power cable. If power cable is
damaged or has deteriorated, then it must be replaced. There
is risk of fire or electric shock.
• For installation, removal or reinstall , always contact the dealer
or an Authorized Service Center. There is risk of fire, electric
shock, explosion, or injury.
• Do not install the product on a defective installation stand. Be
sure that the installation area does not deteriorate with age.
It may cause product to fall.
IMPORTANT SAFETY INSTRUCTIONS
5