LG UUA1 Montageanleitung Seite 27

Connecting the cable to Outdoor Unit
Remove the side panel for wiring connection.
Use the cord clamp to fix the cord.
Earthing work
- Case 1 : Terminal block of Outdoor Unit have
Connect the cable of diameter 1.6 mm
control box and do earthing.
- Case 2 : Terminal block of Outdoor Unit don't have
Connect the cable of diameter 1.6 mm
and fasten with earth screw
CAUTION
!
• The circuit diagram is not subject to change without notice.
• Be sure to connect wires according to the wiring diagram.
• Connect the wires firmly, so that They won't be pulled out easily.
• Connect the wires according to color codes by referring the wiring diagram.
• The Power cord connected to the unit should be selected according to the specifications
on 24 page.
mark.
2
or more to the earthing terminal provided in the
mark.
2
or more, to the panel of control box, marked as
Power cord
terminal Connecting
cable terminal
Cord clamp
Cord clamp
* Make sure the rubber
bushes are Properly
used in knock-out holes
after connecting main
Power cable
WIRING CONNECTION
27