Overview; Use; Technical Data - Rego-Fix Recool Wartungs- Und Betriebsanleitung

2. Overview

2.1 Use

reCool is used exclusively for clamping tools with ER collets (DIN 6499 / ISO 15488).
®
Only original collets, sealing and cooling disks REGO-FIX

2.2 Technical data

The following parameters apply to reCool
Max. Rotation speed:
Max. coolant pressure:
Min. coolant pressure:
Typ
/
RCR ERAX 16
RCR / ERAX 20
RCR / ERAX 25
RCR / ERAX 32
Cooling medium:
Working temperature:
22
rotation:
®
12'000 rpm
100 bar / 2175 PSI* (with high pressure hose)
depending on the rotational speed (see table)
≤ 3'000 min
-1
5 bar / 73 PSI 7.5 bar
5 bar / 73 PSI 7.5 bar
5 bar / 73 PSI 7.5 bar
5 bar / 73 PSI 7.5 bar
Emulsion or oil up to viscosity ≤ ISO VG 46 (46 mm2/s 40°C) and
filtered 20 μm
10° C to 60° C
are recommended to be used.
®
≤ 6'000 min
-1
/ 109 PSI 10 bar
/ 109 PSI 10 bar
/ 109 PSI 10 bar
/ 109 PSI 10 bar
≤ 9'000 min ≤ 12'000 min
-1
/ 145 PSI 15 bar
/ 145 PSI 15 bar
/ 145 PSI 15 bar
/ 145 PSI 15 bar
-1
/ 218 PSI
/ 218 PSI
/ 218 PSI
/ 218 PSI