Inappropriate Use; Maintenance, Repair, Fault Elimination; Warranty And Liability - Rego-Fix Recool Wartungs- Und Betriebsanleitung

1.4 Inappropriate use

REGO-FIX does not take any responsibility for damages caused by inappropriate use.
Inappropriate use includes, but is not limited to:
The operation of reCool
//
40°C)
The use of a defective reCool
//
The use of reCool
//
Use with Minimum Quantity Lubrication (MQL)
//

1.5 Maintenance, repair, fault elimination

Check all fittings and screw connections for tightness
//

1.6 Warranty and liability

Rego-Fix will not honor the warranty or accept any liability for damages caused to either persons or
machinery which can be attributed to one or several of the following causes:
Inappropriate use of the reCool
//
Inappropriate repairs/modifications on the system, done by non-Rego-Fix -trained personnel
//
Inappropriate transport, storage, assembly, commissioning, operation and maintenance of the system
//
Operating of the system in spite of broken safety equipment or insufficiently mounted or not functional
//
safety and protective equipment
No attention to recommendations stated in the operating instructions concerning safety, transport,
//
storage, assembly, commissioning, maintenance and setup of the system
Constructive change of the system without permission
//
Lack of inspection of the system parts, which may be subject to wear
//
Inappropriate repairs and use of spare parts, from other suppliers
//
Catastrophic impacts, e.g. by external influence or force majeure risks
//
without cooling liquid - Emulsion or oil up to viscosity ISO VG ≤ 46 (46 mm2/s
®
.
®
without coolant filter [20 μm]
®
®
21