Machine Data; Fixing Options; Fixing Without Plinth; Fixing To Concrete Plinth - Miele PDR 914 Installationsplan

Machine data

Machine width, total
Machine height, total
Machine depth, total
Niche width
Recommended wall spacing (up to the front edge of the machine)
Minimum wall spacing (up to the back edge of the lid)
Packaging width
Packaging height
Packaging depth
Maximum gross volume
Maximum gross weight
Maximum net weight
Max. floor load in operation
Diameter of exhaust duct
Drum diameter
Diameter of drum opening
Drum depth
Drum volume
Diameter of door opening
Maximum door opening angle
Emission sound pressure level
Sound power level
Average heat dissipation rate into the room
Permissible ambient temperature range

Fixing options

Fixing without plinth

Tensioning strips
Wood screws DIN 571 (Ø × length)
Plugs (Ø × length)
Fixing the appliance in place is absolutely essential.
Fastenings for floating screed must be supplied by the customer on site.

Fixing to concrete plinth

Tensioning strips
Wood screws DIN 571 (Ø × length)
Plugs (Ø × length)
If the tumble dryer is being fixed to a concrete plinth on site, fixing in place is absolutely essential.
Fastenings for floating screed must be supplied by the customer on site.
en - Technical data
51 dB(A) re 20 µPa
Quantity
2
2
2
Quantity
2
2
2
906 mm
1400 mm
852 mm
1250 mm
1300 mm
500 mm
1090 mm
1526 mm
938 mm
1560.2 l
173.7 kg
162.4 kg
1799 N
150 mm
850 mm
520 mm
480 mm
250 l
520 mm
180°
62
3.9 MJ/h
2–40 °C
Screw size
6×40 mm
10×50 mm
Screw size
6×40 mm
10×50 mm
21