Dmx Operation; Functions In 4-Channel Mode; Functions In 6-Channel Mode; Cleaning And Maintenance - EuroLite AKKU Mini PARty RGBW Spot MK2 Bedienungsanleitung

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 6 control channels. However, it
can also be switched to a mode with 4 channels if different functions are required. To be able to operate the device
with a DMX controller, the DMX starting address must be set. The starting address depends upon which DMX
controller is being used. Please refer to the controller's documentation.
1 Press the MENU button so many times until DMX is indicated in the display. Confirm with the ENTER button.
2 The display indicates 4 CH (4 DMX channels) or 6 CH (6 DMX channels). Use the buttons UP and DOWN to
select the desired DMX channel mode. Confirm with the ENTER button.
3 Now the display indicates the menu item for the DMX start address d. Use the buttons UP and DOWN to set
the address. Confirm with the ENTER button.
4 A dot will flash when DMX signals are being received. If no control signals are available, the dot will not flash.
Note: Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX chain. If several devices are addressed similarly, they will
work synchronically.

Functions in 4-channel mode

Channel Value
1 000 – 255
2 000 – 255
3 000 – 255
4 000 – 255

Functions in 6-channel mode

Channel Value
1 000 – 255
2 000 – 255
3 000 – 255
4 000 – 255
5 000 – 255
000 – 005
6 006 – 010
011 – 255
The product is maintenance-free, except for occasional cleaning. You can use a lint-free, slightly dampened cloth
for cleaning. Disconnect the product from power before cleaning. Refer all servicing to qualified personnel. The
LEDs are permanently installed; they cannot be replaced.
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal
which is not harmful to the environment. Devices marked with this symbol must not be disposed of as
household waste. Contact your retailer or local authorities for more information. Remove any inserted
batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used batteries/ rechargeable
batteries. Disposing of them in the household waste is prohibited. You may return your used batteries
free of charge to collection points in your municipality and anywhere where batteries/rechargeable
batteries are sold. By disposing of used devices and batteries correctly, you contribute to the
protection of the environment.

DMX OPERATION

Brightness red (0 – 100%)
Brightness green (0 – 100%)
Brightness blue (0 – 100%)
Brightness white (0 – 100%)
Brightness red (0 – 100%)
Brightness green (0 – 100%)
Brightness blue (0 – 100%)
Brightness white (0 – 100%)
Total Brightness (0 – 100%)
No function
Sound control
Strobe with increasing speed

CLEANING AND MAINTENANCE

PROTECTING THE ENVIRONMENT

22 • EN
Function
Function