Hach SC4500 Basis-Benutzerhandbuch Seite 22

Section 7 Operation
7.1 Configure the controller settings
Set the controller language, time, date, facility, location and display options.
1. Push the main menu icon, then select Controller > General.
2. Select and configure each option.
Option Description
Language Sets the language that shows on the controller display and in the log files.
Time zone Sets the time zone. Select the Region and City for the time zone.
Note: When the controller is connected to Claros this setting is disabled.
Time format Sets the time format: 12 (default) or 24 h.
Time Sets the time.
Date Sets the date.
Date format Sets the date format: dd/mm/yyyy or mm/dd/yyyy (default)
Facility Sets the name of the facility (32 characters maximum). Default: not selected
Location Sets the name of the location (32 characters maximum). Default: controller serial
number
Display Sets the display options:
• screen lock—When set to on (default), the screen automatically locks after the
• Waiting time—Sets the inactivity period, after which the controller locks the
7.2 Connect the instrument to a network
Based on instrument configuration, the instrument can connect to a network with internet connectivity
for configuration and operation. Based on the version, the controller connects to the internet with a
cellular network, WiFi network or a LAN connection. Refer to the expanded user manual on the
manufacturer's website for additional information.
Section 8 Maintenance
Do not disassemble the instrument for maintenance. If the internal components must be cleaned or
repaired, contact the manufacturer.
8.1 Clean the instrument
Clean the exterior of the instrument with a moist cloth and a mild soap solution and then wipe the
instrument dry as necessary.
22 English
inactivity period. When the screen is locked, the touch screen is disabled and
there are no active areas in the display. Touch the screen and swipe up to set
the screen back to operation.
Note: The manufacturer strongly recommends not to disable the screen lock setting. The
Screen lock setting prevents unwanted touches on the screen (especially in outdoor
installations).
screen. Options: 1, 3, 5, 10 or 15 minutes
N O T I C E