Hach SC4500 Basis-Benutzerhandbuch Seite 21

Figure 12 Main screen
1 Measurement window: shows a device data,
push on the tile to show the device detail
window.
2 Diagnostic bar: shows system messages and
alarm conditions, push on the bar to see the
system errors and warnings. Shows pending
tasks and information about the system
3 Status bar
Icon Description
Push to show the Main menu
Claros connection
WiFi connection. Shows when a
USB box with a WiFi adapter is
connected to the controller.
Screen lock. Shows when the
screen is locked.
unlock the screen.
When in a sub menu, push to go
to the main screen
Section 6 Startup
Connect the power cord to an electrical outlet with protective earth ground or set the circuit breaker
for the controller to on.
6.1 Enter initial settings
At initial startup, follow the prompts on the display to set up the language, the date, the time and
network information. Refer to
10
The screen lock option is enabled by default.
Table 5 Icon descriptions
10
Swipe up to
Configure the controller settings
4 Prognosys icon (optional)
5 Carousel icon: swipe on the screen to left or
right to show other screen views.
Icon Description
3G/4G signal strength. Shows
when a USB box with a cellular
modem is connected to the
controller.
USB connection. Shows when a
USB flash drive is connected to
the controller. Blinks when there
is data transmission.
Remote user. Shows when a
remote user is connected to the
controller.
Push to enter a submenu or go
back to the previous menu.
on page 22 to change the settings.
English 21