ausdom E9 PRO Benutzerhandbuch Seite 8

Control Instructions
Power ON
Power OFF
Pairing
Increase volume
Decrease volume
aptX / Qualcomm aptX Low
Latency mode
Play music/video
Pause/restart music/video
Skip to next track
Skip to previous track
Answer the call
End the call
Noise cancelling ON
Noise cancelling OFF
Note: There will be an alert tone when the volume reaches the maximum level.
When the headphones are off, press and hold the
power button for three seconds, you will see the blue
light and hear "power on".
When the headphones are on, press and hold the
power button for three seconds, you will hear "power
off" and the LED flashes red.
Press and hold the power button for about five
seconds until the red and blue light flash alternately.
You will hear "pairing".
Press the volume up button.
Press the volume down button.
When Qualcomm aptX Low Latency device is
connected, the LED turns blue.
Press the power button.
Press the power button.
Press and hold the volume up button for one to two
seconds.
Press and hold the volume down button for one to
two seconds.
When the call rings, press the power button.
To end the call, press the power button.
Push the ANC switch to ON, blue light is on.
Push the ANC switch to OFF, blue light is off.
6