Active Noise Cancelling - ausdom E9 PRO Benutzerhandbuch

Pairing with Wireless Devices
First, make sure the headphones are off. Do not place both devices more than one
meter away from each other. Turn on the wireless function of your device. Then, press
and hold the power button on the headphones until it powers on, but don't let go just
yet. Continue holding down on the power button until you see the LED indicator flash
blue and red alternately, which means your headphones are in the pairing mode,
waiting to be paired with your device. You will hear a prompt. After that, select "Mixcder
E9 PRO" to pair. Once successfully paired, the LED flashes blue. You will hear a prompt.
When connected with Qualcomm aptX Low Latency device, the LED turns blue.
Notes:
Before pairing the headphones with a computer, please make sure your
•
computer or laptop has the built-in wireless feature. If not, you must purchase a
wireless dongle, preferably of version 2.1 or above.
Mixcder E9 PRO will pair with the last device automatically when powered on.
•
Because of different systems, some computer or laptops may need to be
manually connected every time.

Active Noise Cancelling

Mixcder E9 PRO contains a noise cancelling circuit. This means that noise produced by
airplanes, buses or trains is effectively reduced. The noise cancelling effect may not take
effect in a very quiet environment and some ambient noises still may be heard. It also
depends on how you wear the headphones. The noise cancelling function works for
noise in the low frequency band primarily. Although noise is reduced, it is not cancelled
out completely.
Making and Answering a Call
Making a Call
Make sure the headphones are paired with the mobile phone. Dial through the mobile
phone and press the call button on the phone. To end the call, press the power button
once or end the call directly on the phone.
Answering a Call
Make sure the headphones are paired with the mobile phone. Press the power button
on your headphones to answer the call using headphones. If you are listening to music,
it will pause automatically. To end a call, press the button once again or end the call
directly on the phone. As soon as the call is ended, the music will continue to play
automatically.
4