Cameo ZENIT W600 SMD Bedienungsanleitung Seite 23

Use the UP and DOWN controls to select the desired submenu item, and press ENTER to display
the corresponding information.
System Info
Firmware = Displays
Device Firmware
Temperature = Temperature display
LED unit
Operation = Displays operating
Hours time
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the spotlight from accidental and unauthorised
operation (see "Settings" - "Auto-lock"), the controls can also be locked manually. Press and hold
the UP and DOWN controls simultaneously for approximately 5 seconds. If an attempt is made to
change settings, "Locked!" will appear in the display, and changing the spotlight's settings via
the controls is no longer possible. After approx. 1 minute, the current operating mode is displayed
again. To unlock, press and hold the UP and DOWN controls simultaneously for approximately 5
seconds. The display will show the previously displayed information.
Main CPU Vx.xx
LED Vx.xx
Driver1
LED Vx.xx
Driver2
LED xx °C / xx °F
Unit °C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
Unit xx:xx h Displays total operating time in
Operation hours and minutes
Time
LED xx:xx h Separate display of operating
Operation time of R, G, B and W in hours and
Time minutes
23