Cutting Width - ELNA 344 Gebrauchsanweisung

Cutting Width

The stitch, the fabric weight and the number of
fabric layers may require the cutting width dial to
be adjusted. Fabric should lie flat inside the
overlock stitch without loops or tunneling.
Open the side cover to access the dial.
Loops
The cutting width is set narrower than the stitch
width. Move the cutting blades to the right by
turning the cutting width dial to a higher number.
Tunneling
The cutting width is set wider than the stitch
width. Move the cutting blades to the left by
turning the cutting width dial to a lower number.
58