Front Cover; Upper Cutting Blade; Presser Foot Lever - ELNA 344 Gebrauchsanweisung

Front Cover

Open the front cover by inserting
thumb into indent, pushing cover to
the right and tilting cover down.

Upper Cutting Blade

Disengaging (Up-NOT Cutting)
1. Switch OFF the machine. Turn
the flywheel toward you to raise
the needle(s) to their highest
position. Lower the presser foot.
2. Open the front cover.
3. Push the upper cutting blade to
the right and turn the knob
clockwise.
4. Close the front cover.
Engaging (Down-Cutting)
1. Switch OFF the machine. Turn the
flywheel toward you to raise the
needle(s) to their highest position.
Lower the presser foot.
2. Open the front cover.
3. Turn the knob counter-clockwise.
Upper cutting blade will automatically
drop down to the engaged position.
4. Close the front cover.

Presser Foot Lever

Raise Presser Foot
Lift up the presser foot lever.
Lower Presser Foot
Drop down the presser foot lever.
18