Product Description - ELPRO ECOLOG-NET LP4 Betriebsanleitung

ECOLOG-NET LP4, LH2, WP4 & WH2
fr fr fr fr from f

1. Product description

ECOLOG-NET dataloggers are network-compatible (LAN or WLAN) 4-channel dataloggers with a
capacity for recording 64,000 measured values. They are designed for logging temperatures and relative air
humidity. The data is loaded to the PC via local network. The datalogger enables the maximum of data
safety continuing to log measured values even in the event of a power failure or a network disorder by
running on its built-in battery supply. There are various alarm features provided by the local alarm contact
and the network functions.
1.1 Datenlogger The ECOLOG-NET has a number of power connection points at the left side of its
casing. The front side has a display and key pad
Sensors
...P4: 4 x Pt100; -200°C ... 600°C
...H2: 2 x exte; -40°C ... 70°C, 0% ... 100%rF
Fig. 1
1.2 Display Large LCD display for measured values and states
Date
Measured value
with unit
Sensor number
Alarm indicator;
sensors 1..4
...H2: Communication
...P4: Progress bar over all indicators during communication
Fig. 2
Seite - 20
Manual
ECOLOG-NET
om f om f irmw irmw ar are v ar ar e v e v er er er ersion LP sion LP sion LP
om f om firmw irmw irmwar e v e ver sion LP, WP: 1.03, LH, WH: 8.14 sion LP
Netzwork connection
USB connection
Power supply,
digital inputs &
alarm output
Alarm output
Time Alarm
and on the display
, WP: 1.03, LH, WH: 8.14 , WP: 1.03, LH, WH: 8.14
, WP: 1.03, LH, WH: 8.14 , WP: 1.03, LH, WH: 8.14
.
Upper / lower threshold value violated
Wait = Strt (
Normal operation + Wait = StOP (
Battery protection (...P4)
Removal of this slip causes
the first „System Reset"
entry in the datalogger
status!
Wait 10s after the battery
protection has been removed
till the datalogger is operable
Key pad with 4 keys
Type label with ID number
and IP address
Battery
Battery low ( chapter 2.6)
Chapter 6.5 / 7.5)
Chapter 6.5 / 7.5)
D-EL-6003Bk
11. 2009 AG