Product Overview - ELPRO ECOLOG TN2 Handbuch

ECOLOG TN2,TN3-P,TN4,TN4-L,TP2,TP4-L,TH1,TH2
for firmware version TN2:7.00, TNx:7.12, TPx:5.01, THx:8.12 or higher for firmware version TN2:7.00, TNx:7.12, TPx:5.01, THx:8.12 or higher
for firmware version TN2:7.00, TNx:7.12, TPx:5.01, THx:8.12 or higher for firmware version TN2:7.00, TNx:7.12, TPx:5.01, THx:8.12 or higher for firmware version TN2:7.00, TNx:7.12, TPx:5.01, THx:8.12 or higher

1. Product Overview

1.1 Display Large LCD display for measured values and status
Date
(except for TN2)
Measured value with
unit
Sensor number
Figure 1
1.2 Key Pad 4 keys for datalogger operation (except for TN2 & TN3-P)
Figure 2
1.3 Battery
3.6 Volt lithium battery with extended temperature range.
For more information about the operating range of the battery and the battery lifetime
see chapter 2, Application and Safety Regulations.
DB15 connector
Figure 3
D-EZ-6003Bf
Getting Started
ECOLOG
Time Alarm (will stay lit until
(except for TN2) the alarm is reset)
Alarm indicator
for sensor 1.. 4
Communication
Normal operation + Wait = StOP (
Battery case
Upper / Lower limit value
Menu -
blinking
indicators
Battery low ( Chapter 2.4)
Wait = Strt ( Statuscodes)
Statuscodes)
Position of internal
temperature sensor
(TN2 & TN3-P only)
Seite - 13
03. 2009