ELPRO ECOLOG-NET LP4 Betriebsanleitung Seite 32

6.5 Status and error codes; datalogger type ...P4
6.5.1 Datalogger display
ALA Additional alarm text in power-save mode
Strt The datalogger is waiting for log start in accordance with the settings at menu item:
Datalogger setup
StOP The logger is in Start/Stop mode and the memory is full.
No further measured values can be logged. Reprogram the logger to restart logging.
This is the delivery status of the PT100; datalogger type ...P4.
b.F. Battery voltage is too low
C.F. Faulty datalogger
HHHH Faulty datalogger keypad
L.C. Faulty datalogger
O.F. Measured value exceeds allowable maximum
U.F. Measured value is lower than allowable minimum
6.5.2 Status of datalogger in elproLOG ANALYZE ...P4
- System resets since last reprogramming
- This error message appears at datalogger status in line: „Last reprogrammed". It is the result of
the datalogger reset counter.
- All entries in the alarm protocol will be erased!
6.6 Notes; datalogger type ...P4
Software ECOLOG-NET dataloggers require evaluation software, version 3.31 or higher.
No Connection (USB or LAN)
Reaction: enlarge the timeout parameters in communication settings:
- elproLOG ANALYZE (Options - Com Port... - Extended)
- elproLOG MONITOR (Tools - Options - Communication Timeouts)
CD-ROM Refer the elproLOG ANALYZE CD-ROM for further product information.
6.7 Measuring range, operating range, accuracy and supply; datalogger type ...P4
Temperature measurement
(Logger only;
logger at room temperature)
Additional error caused by cable asymmetries for length over 50m
Additional error caused by 2 or 3 wire PT100 sensor
Operating range
Protective class
Supply
Seite - 32
Manual
ECOLOG-NET
Range Resolution
-200.0°C..-100.0°C 0.1°C
-99.9°C..400.0°C 0.1°C
400.1°C..500.0°C 0.1°C
500.1°C..600.0°C 0.1°C
length type
50m 4x0.25mm
100m 4x0.34mm
Wire Cable
2 2x0.366mm
3 3x0.366mm
LP4: -40°C ... 55°C
WP4: -20°C ... 55°C
IP30
U : 10 ...30VDC LP4: 12VDC; 140mA
B
WP4: 12VDC; 200mA
Linearity
± 0.3°C
± 0.2°C
± 0.3°C
± 0.5°C
typical Error
2 , sheelded ± 0.1°C
2 , sheelded ± 0.2°C
typical Error
2 , sheelded ± 0.27°C/m
2 , sheelded ± 0.21°C/m
24VDC; 70mA
24VDC; 100mA
D-EL-6003Bk
11. 2009 AG