SUEZ Sievers M500 Betriebs- Und Wartungsanleitung Seite 366

Anhang E
Firmware Engineering ist zzz in xx.yy.zzz
Messmodus: IC=10, TC=20, TOC=30, NPOC=40
Aktueller Modus:
ON_LINE_MODE = 0
ON_LINE_TIMED_MODE = 1
ON_LINE_AVERAGED_MODE = 2
GRAB_MODE = 3
SAMPLE_CELL_SP_CALIBRATION_MODE = 4, // SP Cond Cal
SAMPLE_CELL_VERIFICATION_MODE = 5, // Sample Cond Ver
LOW_LEVEL_SP_CALIBRATION_MODE = 8
TOC_ACCURACY_PRECISION_VER_MODE = 9
SYSTEM_SUITABILITY_MODE = 10
CELL_CAL_VER_MODE = 11
RESISTANCE_VER_MODE = 12
MP_CALIBRATION_MODE = 13
LOW_LEVEL_TOC_ACC_PREC_VER_MODE = 14
TOC_LINEARITY_MODE = 15
ROBUSTNESS_MODE = 16
SPECIFICITY_MODE = 17
SDBS_SUITABILITY_MODE = 18
SDBS_SUITABILITY_WITH_COND_MODE = 19
SAMPLE_COND_LINEARITY_MODE = 20
ONLINE_TOC_LOD_LOQ_MODE = 21
IC_TC_CONDUCTIVITY_ZERO_MODE = 22
TOC_ZERO_MODE = 23
SAMPLE_CELL_ZERO_MODE = 24
UPW_SAMPLE_COND_AUTOZERO_MODE = 25
SUPERIOS_RINSE_MODE = 26
CELL_DIAGNOSTICS_MODE = 27
ACCELERATED_RINSE_MODE = 28
DRAIN_SAMPLE_SIDE_MODE = 29
STARTUP_MODE = 30
Sievers M500e TOC Analysator
DLM 78510-01 DE Rev. A 366 / 377
Betriebs- und Wartungsanleitung
SUEZ © 2020