Weinmann Accuvac Rescue Montageanleitung Seite 7

7. Use a size 5 wrench to stop the contact pins turning and
tighten the nuts using a size 7 ring wrench.
8. Clean the location for gluing on the mount with isopropyl
alcohol.
9. Peel the protective film off the mount and glue the mount in
position.
10. Attach the capacitor to the mount using the wider cable tie.
11. Combine the capacitor cables with the cables for the charging
interface. In the process, please note: use one cable tie to
combine cables of the same color.
Accuvac Rescue EN 7