Auxiliary Input Socket - Makita DMR108N Betriebsanleitung

station, then press Tuning control knob
the selection.
6. Rotate Tuning control knob
volume and press Tuning control knob
the volume. Radio alarm setting is now completed.
Note:
If new radio alarm station is not selected, it will select
the last alarm station.
Note:
If the selected AM/FM alarm station is not available
when the alarm is sounding, the buzzer alarm will be
used instead.
b. Setting HWS (Humane Wake System) buzzer
alarm:
A beep tone will activate when selecting the HWS
buzzer alarm.
The alarm beep will sound shorter every 15 seconds
for one minute followed by one minute silence before
repeating the cycle.
1. The buzzer alarm can be set either when the radio is
on or off.
2. Press and hold the buzzer alarm button
symbol and the display hour will flash along with a
beep.
3. During buzzer alarm symbol
Tuning control knob
Tuning control knob
setting. Then rotate the Tuning control knob
select the minute and press Tuning control knob
to confirm minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
Press the Tuning control knob
setting.
Note:
There is no volume adjustment for buzzer alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power button
.
Disabling/cancelling alarms
To disable an active alarm, either press the Power
button , or press and hold the corresponding
alarm button to cancel the alarm.
Snooze
1. When the alarm sounds, press any button other than
to confirm
to select the desired
to confirm
, the
flashes, rotate
to select the hour and press
again to confirm hour
to confirm the
the Power button
minutes. "SNOOZE" will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Menu/Info button
setting.
3. Rotate the Tuning control knob
appears on the display, then press the Tuning control
knob to enter the setting. Rotate the Tuning
control knob
10, 15 and 20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is
suspended, press the Power button
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 60, 45, 30, 15, 120 and 90 minutes.
1. Press and hold the Power button
Sleep Timer setting. "SLEEP XX" will show on the
display.
2. Keep holding the Power button
Timer options will start switching on the display. Stop
until the desired Sleep Timer setting appears on the
display. The setting will be saved and the LCD will
return to normal display.
3. Your radio will switch off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer
icon will show on the display indicating an active
to
Sleep Timer.
4. To cancel the Sleep Timer function before the preset
time has elapsed, simply press the Power button
to turn the unit off manually.
Loudness
You can get compensation on lower and higher
frequency for your radio by adjusting the loudness
function.
1. Press and hold the Menu/Info button
the menu setting.
2. Rotate the Tuning control knob
or "LOUD OFF" appears on the display. Press the
Tuning control knob
3. Rotate the Tuning control knob
turn on the loudness function, then press the Tuning
control knob
4. To turn off the loudness function, select OFF and
press the Tuning control knob
setting.

AUXILIARY INPUT SOCKET

A 3.5mm Auxiliary input socket is provided at the front
of your radio to permit an audio signal to be fed into the
unit from an external audio device such as a MP3 or CD
player.
12 ENGLISH
will silence the alarm for 5
to enter the menu
until "SNOOZE X"
to adjust the silence time from 5,
to enter the
and the Sleep
until "LOUD ON"
to enter the setting.
to choose ON to
to confirm the setting.
to confirm the
.
to enter