Brightness Control; Softwareversion; Auxiliary Input Socket - Makita DMR110N Betriebsanleitung

3. Rotate the Volume/Tuning Control/Select knob to
choose your desired language. Press the Volume/
Tuning Control/Select knob to confirm your setting.

Brightness control

The backlight of the display can be adjusted.
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"Backlight" shown on the display. Press the Volume/
Tuning Control/Select knob to enter the setting.
3. Rotate the Volume/Tuning Control/Select knob to
choose to enable or disable the backlight function,
then press the Volume/Tuning Control/Select knob to
confirm the setting.
System reset
If your radio fails to work correctly, or some digits on
the display are missing or incomplete, carry out the
following procedure.
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"Factory Reset" shown on the display. Press the
Volume/Tuning Control/Select knob to enter the
setting.
3. Rotate the Volume/Tuning Control/Select knob to
choose "Yes". Press the Volume/Tuning Control/
Select knob to confirm the setting and a full reset will
be performed.
Software version
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob
until "SW Version" shown on the display. Press the
Volume/Tuning Control/Select knob to view the
software version installed in the radio.
Micro USB port for software upgrade
Software updates for your radio may be available in the
future.
As software updates become available software and
information on how to update your radio can be found at
Makita website.

AUXILIARY INPUT SOCKET

A 3.5mm Auxiliary input socket is provided at the front
of your radio to permit an audio signal to be fed into the
unit from an external audio device such as a MP3 or CD
player.
1. Connect an external audio source (for example, MP3
or CD player) to the AUX IN socket.
2. Press the Power button to switch on your radio.
3. Repeatedly press and release the Band button until
"AUX 1" is displayed.
4. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on
your audio device and then adjust the volume on the
radio as required.
Note:
Audio cord is not included as standard accessories.
MAINTENANCE
CAUTION:
● Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
SPECIFICATIONS
Power requirements
AC power adaptor
Battery
Frequency coverage
DAB/DAB+ Channel
block
Compatible standard
Circuit feature
Loudspeaker
Output Power
Input terminal
Antenna system
Dimension
(L x W x H) in mm
Weight
11 ENGLISH
DC 12V 1A, center pin positive
Cluster battery: 10.8V
Slide battery: 10.8V - 18V
FM 87.50-108 MHz
DAB/DAB+
174.928-239.200 MHz
DAB (Band III) 5A-13F
DAB/DAB+
3 inches 8 ohm
10.8V: 1.2W x 2
14.4V: 2.2W x 2
18V: 3.5W x 2
3.5mm dia. (AUX IN)
DAB/FM:
soft bended rod antenna
280 x 163 x 302mm
3.9Kg (without battery)