Single Measurement; Continuous Measurement - geo-FENNEL GeoDist 80 Bedienungsanleitung

EN
ADDITION / SUBTRACTION
= add
= substract

SINGLE MEASUREMENT

Power on the unit - measuring mode: single measurement
For taking measurements press

CONTINUOUS MEASUREMENT

Keep pressed.
Sweep slowly the unit back and forth over the selected target point.
Press to stop the continuous measurement.
Display indication: maximum, minimum and the last mea-
sured value.
Navigation within the following measuring modes after having
pressed
or
= up /
..... = repeat the mode
= leave the mode
32
etc.
= down