Machine Components - Wolf Garten GT-S 800 Originalbetriebsanleitung

„
Do not mount blades comprising
several pieces. Only one-piece
blades may be used.
„
Do not mount saw blades.
„
Do not mount blades with a diameter
of more than 230 mm.
„
Take precautions against the risk of
injury from the cutting device which
adjusts the length of the cord.
„
Put unused tools away. When not in
use, store the tool high up in a dry
closed room, out of reach of children.
„
Switch the motor off when
transporting the machine.
„
Cover the teeth of the blade with the
blade guard when transporting the
machine over long distances.
„
For reasons of safety, connect the
tool to a power socket protected by a
differential switch with a max. current
of 30 mA.
„
Never grip the tool above your hips;
never lift a machine while the blade
is still turning.
„
Check the work area before starting
work; remove any stones, broken
glass, nails, wires and other solid
objects that may be caught and
ejected by the cutting device.
5. D
ESCRIPTION OF

MACHINE COMPONENTS

1
F . 1
IG
1. Motor unit
2. ON-OFF switch
3. Power cable
4. Harness latch
5. Front handle
6. Front guard
7. Connection clamp
8. Warning plate
9. Guard
10. Guard extension for wire head
11. Wire length adjusting blade
12. Wire head
13. Gearbox
GT-S 800
D
ESCRIPTION OF
MACHINE COMPONENTS
1
F . 2
IG
1. Motor unit
2. ON-OFF switch
3. Power cable
4. Harness latch
5. Front handle
6. Front guard
7. Connection clamp
8. Warning plate
9. Guard
10. Guard extension for wire head
11. Wire length adjusting blade
12. Wire head
13. Gearbox
14. Cutting blade
NOTE: Make sure that the power tool
and accessories in the package are not
damaged
NOTE: Read these operative
instructions carefully before attempting
to operate the drill
GT-S 800
MACHINE COMPONENTS
1
F . 3
IG
The package contains the following:
1. Motor unit with half length rod
2. Rod extension with reducer head
3. Wire head guard plate
4. Aluminium flange
5. Plastic bell housing
6. Wire head
7. Harness latch
8. Screw bag
9. Guard extension for wire head
10. Cutting unit guard
11. Supporting harness
12. Front handle with guard
13. Front handle fixing plate
14. Earmuffs
15. Goggles
GT-S 800/1000
GT-S 1000
27