Seca 882 Bedienungsanleitung Und Garantieerklärung Seite 28

Target weight (seca pragma 883 only)
If the target weight function is activated, a stored weight is deducted from the currently-
measured weight. This function is useful if, for example, you wish to achieve your personal
"ideal weight". We recommend calculating your ideal weight first (see Page 26).
Three different tare weights can be stored.
– Press the Start key with no load on the
scale
se(a 8. 8 . 8 . 8 . 8 .
,
secutively in the display. The scale is
then automatically set to zero and
ready for operation.
– Press the FUNC key.
The last function used appears in the
display.
– Use the arrow keys to select function
FU 3. Activate the function by pressing
the FUNC key again.
An arrow on the left-hand side of the
display indicates which memory is se
– Use the arrow keys to select the mem-
ory where you want to store the addi-
tional weight - or have possibly already
stored it.
– Then press FUNC.
You will see the limit value from the
memory displayed.
– You can use the arrow keys to adjust
the value in increments according to
the graduations displayed.
– Once the correct value is set, press the
FUNC key again.
The Pre-Tare function is now activated.
– Step on the scale and keep still.
– Read the weighing result off the digital
display.
– To return to normal weighing mode,
press the FUNC key.
– To switch off the scale, press the Start
key again.
28
0. 0 0
and appear con-