Seca 882 Bedienungsanleitung Und Garantieerklärung Seite 27

Weighing with Pre-Tare (seca 882 only)
If the Pre-Tare function is activated, a stored weight is deducted from the currently-
measured weight. This function is useful if, for example, the weight of clothing is not to be
included.
Three different tare weights can be stored.
– Press the Start key with no load on the
scale.
se(a 8. 8 . 8 . 8 . 8 .
,
secutively in the display. The scale is
then automatically set to zero and
ready for operation.
– Press the FUNC key.
The last function used appears in the
display.
– Use the arrow keys to select function
FU 3. Activate the function by pressing
the FUNC key again.
An arrow on the left-hand side of the
display indicates which memory is se
– Use the arrow keys to select the mem-
ory where you want to store the addi-
tional weight - or have possibly already
stored it.
– Then press FUNC. You will see the limit
value from the memory displayed.
– You can use the arrow keys to adjust
the value in increments according to
the graduations displayed.
– Once the correct value is set, press the
FUNC key again.
The Pre-Tare function is now activated.
– Step on the scale and keep still.
– Read the weighing result off the digital
display.
– Press an arrow key if you would like to
see current weight briefly.
– To return to normal weighing mode,
press the FUNC key.
– To switch off the scale, press the Start
key again.
Model 882/pragma 883
0. 0 0
and appear con-
GB
27