Laying Cables - Lenord+Bauer GEL 27-Serie Betriebsanleitung

5 Mounting Lenord + Bauer

Laying cables

 Mount the torque support to the mounting. During this process pay attention to firm
seating.
5.3 Laying cables
– Pay attention to the minimum bending radius so that the connection cable is not
damaged by excessive bending (see Technical data → page 52f).
 Observe the EMC instructions while laying the cables (see → page 39).
 Fix the cables to suitable fixing points and ensure there is adequate strain relief.
46
GEL 27xx