3 Safety instructions
1
1
Machine
2
GEL 27xx
3
Evaluation electronics
4
Control cables
5
Equipotential bonding cable (only in case of extreme interference)
6
Optional: level-pulse converter or line driver
*
Only in case of extreme interference or long cables
The encoder is part of a machine or system. Integrate the equipotential bonding for
the encoder into the overall screening concept.
Lay the signal cables and control cables physically separate from the power cables.
If this configuration is not possible, use screened twisted pair cables and/or lay the
encoder cable in a steel conduit.
Ensure that external protection measures against surges have been implemented
(EN 61000-4-5).
40
EMC instructions
2
*
6
5
Lenord + Bauer
3
4
GEL 27xx