Identification Of The Encoder; Rating Plate; Encoder Types - Lenord+Bauer GEL 27-Serie Betriebsanleitung

Lenord + Bauer
2

Identification of the encoder

2.1

Rating plate

The following data are applied to the encoder:
Type Type of encoder GEL 27xxYxxx
Ser. Serial number
Impuls/Pulse Number of pulses per revolution
Kanal/Chan. Channel
UB Supply voltage (V
2.2

Encoder types

Types GEL 2710 and 2712 are appropriate for bogies with outside bearings. They are
flanged onto the bearing cover of the wheel set and driven by a clutch disc, for instance.
The GEL 2701 is appropriate for bogies with inside bearings. The wheel set is equipped
with a rotor flange, allowing the incremental encoder to turn freely. A torque support
connected to the bogie frame prevents the encoder from simultaneous rotation.
All types can be customised with various cables, protective sleeves and connectors.
Depending on the requirements, up to 8 output channels can be configured.
Encoder type Description
GEL 2701 Incremental encoder with torque support
GEL 27xx
Rating plate
)
S
2 Identification of the encoder
Design example
35