Programming; Configuring The Address For Modules - Simons Voss Technologies MOD.SOM8 Kurzanleitung

MOD.SOM8

8 Programming

9 Configuring the address for mod-
Module
Module 1
Module 2
Module 3
Module 4
Module 5
Module 6
Module 7
Module 8
Module 9
Module 10
Module 11
Module 12
Module 13
Module 14
EN
For programming information, please refer to the LSM
manual and the system manual of the corresponding
SmartRelay.
ules
Each connected module is actuated using its address.
This address is set on the address switch. If you
connect a SmartOutput module to a SmartRelay 3, set
the following addresses:
Address
0 (initial setting in the factory)
1
2
3
4
5
6
7
8
9
A
B
C
D
8. Programming
33 / 140