Selecting The Location For The Indoor Unit; Required Minimum Space For Installation And Service; Installation Of Indoor Unit - Panasonic S-36PN1E5B Installationsanleitung

3. SELECTING THE LOCATION FOR THE INDOOR UNIT

3-1. Required Minimum Space for Installation and Service.

Provide a check port on the piping side ceiling for repair and maintenance.
 Install the indoor unit once the following conditions are satisfi ed and after receiving the customer approval.
1. The indoor unit must be within a maintenance space.
2. The indoor unit must be free from any obstacles in path of the air inlet and outlet, and must allow spreading of air
throughout the room.
Top view
(Unit:mm)
If the height from the floor to ceiling exceeds three meters, air flow distribution deteriorates and the effect is
decreased.

INSTALLATION OF INDOOR UNIT

POSITION OF SUPENSION BOLT
A
B
(Unit:mm)
TYPE A
S-36PN1E5B
S-45PN1E5B 840 780 523
S-50PN1E5B
S-60PN1E5B
1060 1000 523
S-71PN1E5B
S-100PN1E5B
S-125PN1E5B 1260 1200 523
S-140PN1E5B
Control box
Inspection hole
(600 x 600)
600
600
<Front>
B C D E
64 650
64 650
64 650
Front view
Above 250cm

Apply a joint-canvas between the unit and duct to absorb unnecessary
vibration.
 Install the unit leaning to a drainage hole side as a fi gure for easy water
drainage.
Caution
Remove the absorber at air return
hole before installation.
Absorber
8
1~3mm
Drainage hole
Fig. 3-1
Fig.3-1.1