Citysports CS-WP2 Produktanleitung Seite 12

9. Trouble code
C o d e
E01 Poor
between electronic meter
and controller
E02 Explosion-proof
impact-proof protection
E05 Over current protection
E06 Overload protection
C a u s s e
communication 1. Check that the connection between the electronic
meter and the controller is not properly connected.
2. The main IC of the controller contacts badly and is
re-tightened.
3. Controller power supply abnormal, change
controller
and 1. If the motor is open or in bad contact, replace the
motor or check the connecting terminals.
2. Power tube breakdown, replace it or the
controller.
1. Overload.
2. The resistance of the treadmill is too heavy and
needs to be lubricated.
3. The motor is damaged, replace it.
- 10 -
R e s l o t u o i s n
ＥＮ