Technical Data; Installation - IKEA LIVSGNISTA AA-1147126-3 Bedienungsanleitung

ENGLISH ENGLISH ENGLISH

Technical data

Technical data Technical data
Dimensions Dimensions
Width (mm) Width (mm)
Height (mm) Height (mm)
Length (mm) Length (mm)
Voltage (V) Voltage (V)
The technical information are situated in the The technical information are situated in the
rating plate on the bottom side of the appliance. rating plate on the bottom side of the appliance.

Installation

Installation Installation
Use protective gloves for handling, Use protective gloves for handling,
preparing and installing the product. preparing and installing the product.
After unpacking the hob, make sure that it After unpacking the hob, make sure that it
has not been damaged during transport. In has not been damaged during transport. In
the event of problems, contact the dealer or the event of problems, contact the dealer or
your nearest After-sales Service. your nearest After-sales Service.
Technical information for the installer Technical information for the installer
- - This product can be embedded in a This product can be embedded in a
worktop 20 to 60 mm thick. worktop 20 to 60 mm thick.
- - If there is no oven beneath the hob, If there is no oven beneath the hob,
insert a separator panel that has a insert a separator panel that has a
surface at least equal to the opening surface at least equal to the opening
in the work surface. This panel must be in the work surface. This panel must be
positioned at a maximum distance of positioned at a maximum distance of
150 mm below the upper surface of the 150 mm below the upper surface of the
work surface but, in no case less than 20 work surface but, in no case less than 20
mm from the bottom of the hob. mm from the bottom of the hob.
- - Before installation, make sure that: Before installation, make sure that:
- - the local gas delivery conditions (nature the local gas delivery conditions (nature
and pressure) are compatible with the and pressure) are compatible with the
settings of the hob (see the rating plate settings of the hob (see the rating plate
and injector table); and injector table);
590 590
44 44
510 510
220-240 V ~ 220-240 V ~
- - the outer surfaces of the furniture or the outer surfaces of the furniture or
appliances adjacent to the hob are heat appliances adjacent to the hob are heat
resistant according to local regulations; resistant according to local regulations;
- - This appliance is not connected to a This appliance is not connected to a
fume exhaust device. It shall be installed fume exhaust device. It shall be installed
in accordance with current installation in accordance with current installation
regulations. Particular attention shall regulations. Particular attention shall
be given to the relevant requirement be given to the relevant requirement
regarding ventilation. regarding ventilation.
- - Combustion products are discharged Combustion products are discharged
outdoors through specific hoods or wall outdoors through specific hoods or wall
and/or window mounted electrical fans. and/or window mounted electrical fans.
Gas connection Gas connection
This operation must be performed by a This operation must be performed by a
qualified technician. qualified technician.
The gas supply system must comply with The gas supply system must comply with
local regulations to the relavant gas local regulations to the relavant gas
standard. standard.
- - You can find specific local regulations for You can find specific local regulations for
some countries in the paragraph some countries in the paragraph
- - "Reference to Local Regulations". If no "Reference to Local Regulations". If no
information concerning your Country is information concerning your Country is
15 1 1 1 1