B+B BX 11 Bedienungsanleitung Seite 59

Flipping the footplate up and down
• Grip under the footplate and flip it up to the side (Fig. 09).
• Once you are sitting in the wheelchair, flip the footplate down
again. Then press the footplate down until it you hear it click into
place.
Adjusting the legrest length
The footplate can be adjusted to the lower leg length in 8 positions at
15 mm steps.
• To do this remove both socket screws on the legrest tube (inner and
outer) and adjust to the required length (Fig. 10).
• Re-tighten the screws.
Adjust the angle of the footplate
The angle of the footplate can be adjusted (Fig. 11):
• Unscrew the socket screw.
• Twist the sprocket to adjust the angle of the footplate to the requi-
red position
• Re-tighten the screw.
Before driving, please make sure that the legrests are
firmly in place!
Carry out the same adjustments on both sides.
Bischoff & Bischoff GmbH |2021-09-28 - Revision: 1
Adaptive wheelchair |
BX 11 | BX 11 S
08
09
10
2
11
1
2
59