Herunterladen Inhalt Inhalt Diese Seite drucken

cecotec Ready Warm 5250 Swing Box Ceramic Bedienungsanleitung Seite 28

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 45
ENGLISH
Example: setting Monday 1st, 1 operating period from 7:00 to 13:00
• Setting open-window mode (only remote control)
-
Press
to switch the appliance on.
-
Press
to active the open-window mode (
-
Press
and
During open-window mode, if the room temperature drops from about 5°C to 10°C in less than
10 minutes, the appliance will stop operating and enter standby mode. Press
switch on the appliance.
WARNING: in case both modes, open-window and week scheduling modes, operate at the
same time, the device will always turn off when the temperature has fallen from 5°C to 10°C in
less than 10 minutes, even though it has been scheduled to operate.
Remote control
Note: the remote control requires 1 x CR2025 3V lithium battery (not included).
1.
Open the battery compartment by sliding the cover down.
2.
Insert the battery into the compartment, observing the polarity in the diagram (see below
drawing).
3.
Close the battery compartment.
28
READY WARM 5250 SWING BOX CERAMIC
DAY
EDIT
to set the temperature of the open-window mode.
TIME/ON
will light up).
TIME/OFF
again to

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis