Vaillant atmoCRAFT VK 654/9 Installations- Und Wartungsanleitung Seite 73

Fig. 4.23 Fitting the cover plate
• Place the cover plate (1) in position. The braces (3) of
the cover plate should be inserted into the slots in the
side plates (2). Then push the cover plate back until
the front edge of the cover plate is in line with the
side plates.
Fig. 4.24 Fitting the exhaust gas pipe
• Push the exhaust gas pipe (to be provided by the
customer) (1) onto the flow safety device.
Note!
Make sure that the exhaust gas pipe (1) is
located tightly within the pipe connection of the
flow safety device.
Installation and maintenance manual atmoCRAFT
1
1
2
3
Fig. 4.25 Inserting the front plate
• Place the front plate (1) onto the pins (2) on the
plinth rail.
• Push the front plate (1) using the two pins (3) into the
retaining springs (4).
1
Assembly 4
4
3
2
GB 19